Mountain Adventure District

Triple R Carbon-6 Drive (Gen3)

$560.00

Product Features

Ultra-lightweight, PC-ABS material housing

Combination of high intensity ‘matrix’ LEDs

Available with Spot or Drive optics

Secondary ‘dip/low’ beam mode

Additional lighting modes possible with variable PWM input signals

Active Power Management regulates current draw (max 7.3A) at low voltages

Carefully selected 5000K colour temperature maximises sharpness and definition

Included quick fit and release lens covers – Amber and Black

CAE-optimised heatsink requires minimal airflow to maintain 100% light output

Dynamic drive modulation preserves electronic components in adverse conditions

Low profile, edge-to-edge design for improved aerodynamic performance

Lamp features a built-in DT04-4P Deutsch Connector (gold plated solid DT contacts)

Vehicle side connector, plus 300mm cable length supplied with each lamp.

Compatible 2-lamp and 4-lamp wiring looms available

Rally mounting solutions available including carbon-fibre rally pods

Fine tune adjustment mechanism on each light for accurate aiming (when used with compatible rally pods)

‘Unbreakable’ polycarbonate lens

IP68 watertight

5-year warranty

Designed & manufactured in Britain

Technical Specifications

BOOST
MODE

LOW OUTPUT
MODE *

   
Voltage Range (DC) 10-32V
LED Life 50,000 hours
Weight 1 lbs
 
HIGH BEAM FUNCTION
Total Luminous Flux 9360 Lm 2340 Lm
Total Driver 'FOV' Flux † 6550 Lm 1638 Lm
Colour Temperature 5000K
Power Consumption 85 Watts 22 Watts
Peak Current Draw 7.2 Amps 1.8 Amps
Current Draw (14.4V) 5.9 Amps 1.5 Amps
Connector 4-Pin Deutsch DT (+25cm Cable)
 
DIMENSIONS
Width 12.4''
Depth 3.9''
Height 2.5''
 
CERTIFICATION
IP Rating # IP68
EMC Certification ECE R10
Salt Spray Test ISO 9227
Dump Load Protection ISO 7637-2
 
PHOTOMETRIC DATA
Horizontal / Vertical Beam Angle 60° / 15°
0.25 lx Line 959m 429m
0.5 lx Line 678m 303m
1 lx Line 480m 214m
3 lx Line 288m 124m
 

 

* Low Output Mode activated by alternate PWM signal (see datasheet for more information).

† - Driver FOV flux is a measure of effective lumens taking consideration of the amount of light in a driver's 'field-of-view' defined as an area +/- 45° left/right, and +/- 10° up/down. For more information – click here.

# - All Triple-R products are designed to meet the requirements of IP68 testing. Every lamp produced at our UK facility is fully submerged under water prior to sending out.

What's Included

  • x1 Carbon-6 Drive LED Light
  • x1 Amber Lens Cover
  • x1 Black Lens Cover
  • x1 Installation Instructions